Wireless Access Points + wifi repeater

NetComm NP730 802.11b/ g Wireless Outdoor Access Point/ Repeater/ Bridge

Edimax IEEE EW-7206APG Wireless LAN Access Point is acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11gb wireless LAN this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes. The Universal Repeater function can extend the coverage and signal strength for the current wireless environment. It is compatible with other wireless APs and Routers. Users can use this feature to build up a large wireless network in a huge space like airports hotels and schoolsetc. You can connect EW-7206APg to a network devices Ethernet port and enable Station mode. It turn easily this wired network device to a wireless one without changing any configuration. Beside the basic security control by ESSID and 64128 bit key length WEP encryption this access point also supports the advanced security features like MAC access control IEEE 802.1x authentication TKIP AES and hidden ESSID. It provides a total solution for you to build up a se

The NetComm NP730 is an outdoor device that will operate in access point, repeater and bridge mode. Designed to meet the needs of today's most demanding wireless LAN deployments, the NetComm NP730 offers a 5DBI antenna with a 200mw inbuilt booster to e...

PI DATE: March 2007 STANDARDS: IEEE 802.11g,802.11b,80 2.3,802.3u, 802.3af(Power Over Ethernet), 802.1p (QoS priority),802.1q (VLAN), 802.1X(Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming)PORTS :10/ 100 Base-T Ethernet, 12 VDC PowerOPERATING SYSTEM :LinuxWebUI : Built in Web UI for Easy browser-based configuration (HTTP/ HTTPS)MGMT:SNMP Ver 1,2c,3, Event Logging E-mail Notification, Remote Syslog, Firmware Upgr Through Web-Browser, Diags:Flash,RAM,LA N,WLAN,DHCP ClientACCESS POINT : Access Point Mode, point-to-point Bridge Mode, Point-to-multipoin t Bridge Mode, Repeater ModeSPEC/ MODULATION RADIO & Modulation Type: 802.11b/ DSSS, 11g/ OFDMNO OF EXT ANT : 2 (Omni- Directional) SMA detachableANTENNA GAIN in dBi 2RECEIVER SENSITIVITY 11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBMSECURITY : WEP/ WPA/ WPA2,Access Control,SSID Broadcast,802.1X, Wireless Client IsolationDIMENSIO NS : 170 x 205 x 195 mm (W x H x D) * Supp WEP,WPA-PSK,WPA2-P SK,WPA-ENT, WPA2-EN

PI DATE : Jan 2008STDS IEEE 802.11g, 802.11b, 802.3, 802.3u,802.3af (PoE), 802.1p (QoS priori 802.1Q (VLAN),802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS) 802.11F (Wireless Roaming)PORTS 10BASE-T/ 100BASE-TX Ethernet, 12VDC PowerSETUP/ CONFIG: WebUI Built-In Web UI for Easy Browser-Based ConfigOPERATING MODES: Access Point Mode, Point-to-Point Bridge Mode, Point-to-Multipoin t Bridge Mode, Repeater ModeWIRELESS :Spec/ Modulation Radio and Modulation Type: 802.11b/ DSSS, 11g/ OFDMNO OF INTERNAL ANT. NoneNO OF EXTERNAL ANT: 2 (Omnidirectional) 3dBi SMA DetachableTRANSMI T POWER Transmit Power (Adjustable) @ Normal Temp Range:11b - 18 dBm; 11g - 16 dBmANTENNA GAIN in dBi 3RECEIVER SENSITIVITY 11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBMWEP/ WPA/ WPA2: WEP 64bit/ 128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENTACCESS CONTROL Wireless Connection Control: MAC-BasedSSID BROADCAST SSID Broadcast Enable/ Disable802.1X IEEE 802.1X SupportWIRELESS CLIENT ISOLATION Wless Client Devices

PI DATE : October 2007HARDWARE :IEEE 802.11n (Draft) specification, 300 Mbps raw data rate Backward compatible with 802.11g/ 11b wireless networks 1 x 10/ 100 Mbps Ethernet port for connection to a switch or router Detachable antennae (reverse SMA connector, female)WIRELESS : 5 operation modes: AP, WDS. WDS with AP, client & repeater Multiple SSIDs (8) for network segmentation Wi-Fi Multimedia (WMM) support, User limitSECURITY : 64/ 128-bit WEP encryption ; Wi-Fi Protected Access (WPA/ WPA2) MAC address filtering ; SSID Broadcast Disable function; 802.1Q VLAN tagging ; Support for 802.1X RADIUS MANAGEMENT: D-Link Clickn Connect (DCC) easy set-up with wizard Web-based management* The DAP-1353 can be configured to operate in any of the following 5 modes (1) Wireless Access Point (AP), (2) Wireless Distribution System (WDS) bridge, with one or more peer APs, to easily create dedicated building-to-buildi ng links, (3) WDS with AP, to allow wireless clients on the WDS link (4) Wireless client, to give wireless N c

PI DATE : Feb 2008LAN Port: 10/ 100 Base-T (RJ45), Auto-MDIX, IEEE802.3af PoELED: 1xStatus, 1xPower, 1xLAN, 1xWLAN; Console Port: 1 x DB9 female RS232WLESS SPECIFICATIONS: IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11d AP, Repeater, Client AP, PTP, PTMP Multiple-SSID; Coverage: Up to 465sq me Worldwide mode (802.11d), Roaming, 1 x 2dbi detached antenna Modulation Schemes: OFDM Symbol Modulation DQPSK, DQPSK, DBPSK, ROBO Carrier Modulation Transmission Power: 18 dBm Maximum (user adjustable) SECURITY : WEP, WPA-PSK, WPA2-PSK, 802.1X wireless security EAP-MD5, EAP-TLS, EAP-TTLS, PEAP; Radius-based MAC address authentication MAC address Filter UAM (Universal Access Method) Configurable Web Port Client to client communication prevention per ESSID, Wless Separation httpMGMT : Web browser management, Access Point Manager program, SNMP V1, V2C Telnet & CLI mgmt ; Win Utility to config & manage multiple Access Points Config file backup & restore ; Detailed status reports (incl Sys log & a list of all detected w

PI DATE : November 2007BUNDLE DETAILS : NTG8004 + NTG8005NTG7302 WG102 PROSAFE 802 11g Wireles Access PointLAN PORT: 1 x 10/ 100BT Enet (RJ-45) with Auto Uplink (Auto MDI-X)ANTENNA CONNECTOR: 1 x reverse SMAPower adapter: Output 12 VDC, 1.2 A; plug is localized to country of sale4x LEDs: Power, Test, 100 Mbps, Link/ ACT, and WLAN 802.11gNETWK MGMT: Remote configuration & management through Web browser, SNMP or Telnet with CLI ; SNMP mgmt supp SNMP MIB I,MIB II & 802.11MIBADV WLESS FEAT: Bridging & repeater mode:Adjustable transmit power control 100mWdown to 0mW* Supports MAC address authentication with 256-user Access Control List (ACL) & VPN pass-throug* Intg IEEE 802.3af-based Power over Ethernet (PoE) support eliminates extra cables and the need to locate near a power outlet, as the access point is powered over the Ethernet cable NTG8005 WAGL102 PROSAFE 802.11A/ G W'LESS APPORTS : LAN 1 x 10/ 100B-T Enet (RJ-45) port with Auto Uplink (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) supportANTENNA CONNE

PI DATE : June 2007 STANDARDS COMPLIANCE : IEEE 802.11b/ g, IEEE 802.3, IEEE 802.3uMEMORY : SDRAM (8 MB) FLASH (2 MB) RADIO FREQUENCY TYPE: DSSS / OFDM MODULATION : IEEE 802.11b: CCK,DQPSK,DBPSK;IE EE 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAMFREQUENCY BAND : America/ FCC: 2.412 2.462 GHz (11 channels) Europe CE/ ETSI: 2.412 2.472 GHz (13 channels) TRANSMISSION POWER : IEEE 802.11b: 20dBm IEEE 802.11g: 20dBmTRANSMISSION RATE: IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps Super G: up to 108MbpsAccessCCES S PointOINT INTERFACES: Auto MDI/ MMDI-X Ethernet 10/ 100Base-TX: RJ- 45SENSITIVITY: -86dBm @ 11Mbps, PERANTENNA TYPE : 5dBi detachable antenna with N type connectionSECURIT Y SYSTEMS : 64-bit/ 128-bit/ 152-bit/ WEP encryption Wi-Fi Protected Access(WPA)WIRELES S SETTINg: Operation Mode-AP/ Wireless Client/ Repeater/ Bridge(WDS)PtP & PtMP ModeSoftware

PI DATE: JULY 2007PRODUCT: Wireless-G Exterior Access Point with Power Over EnetSTANDARDS: IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power over Enet), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (WMM & U-APSD), 802.11F (Wireless Roaming)PORTS : 1 x Enet, 1 x Ext Antenna BUTTONS: ResetCABLING TYPE: UTP CAT 5 OS: LinuxLEDs : Power, Enet, Wireless SETUP/ CONFIG: Static IP :Yes; DHCP Client: Yes Web UI :Built-In Web UI for Easy Browser-Based Config (HTTP/ HTTPS)OPERATING MODES: AP : Access Point Mode, Point-to-Point Bridge Mode, Point-to-Multipoin t Bridge Mode, Repeater ModeWIRELESS : Spec/ Modulation 802.11b/ DSSS, 802.11g/ ODFM Data Rates: 802.11b: 1, 2, 5.5, 11 Mbps; 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 MbpsSECURITY : WEP/ WPA/ WPA2 WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Connection Control: Wireless Connection Control: MAC- BasedWIRELESS SECURITY: WEP Bits 64, 128 WPA Bits and Params. 128 - TKIP/ AES WPA2 Bits and

This powerful device provides the ultimate in industry standard access to corporate network resources, email and the Internet. Fully compatible with IEEE 802.11g, (2.4 GHz), it can also be set for dynamic 108 Mbps 802.11g.

CISCO AIRONET AIR LAP1242AG A K9

Edimax Wireless 802.11b/ g Access Point

Description PROSAFE DUAL BAND WIRELESS ACCESS POINT WAG102 Universal 802.11a/ b/ g Wi-Fi access provides maximum WLAN performance in high-density, high interference deployments as many as 128 simultaneous users High-speed connectivity, up to 108 Mbps in ...

Edimax EW-7416APn Wireless 802.11n 2.0 Access Point, Ethernet Port, 4 MSB Flash, 16MB SDRAM, Increase Up to 12 Times Faster & 5 Times Coverage, Support, WDS, AP Client, WPA, WPA2, WPS, Vista Compatible, 1 Year Warranty

Netgear NTGWG602 802.11g 54Mbps Wireless AP w Bridging+Repeatin g (WG602)

Netgear NTGWPN802 Rangemex Wless Access Point MIMO Technology (WPN802)

Netgear WAG102 ProSafe Dual Band Wireless Access Point, IEEE 802.11abg, LAN

Zyxel 802.11a/ b/ g Wireless Access Point for Business, POE, Multiple SSID Capable, Supports WMM and ATC, Support Wi-Fi, WMM, ATC, WEP, WPA, WPA2, 2dBi Antenna (NWA-3160)